Impinj R700 RFID Reader
Advanced RFID reader, high throughput
From €1,295
RFID Antennas
Kathrein WRA 3070
The Kathrein WRA 3070 is a UHF RFID antenna, not a standalone scanner. It always needs an RFID reader connected to it to work: either the Impinj R700 or the Brady FR22. This antenna handles radio communication with RFID tags; the reader does the actual processing. IP67-rated for outdoor and harsh environments, 12 dBic gain, up to 20m read range. Ideal for gate setups, dock doors and industrial RFID installations.
Why choose the Kathrein WRA 3070
- Antenna only. Always requires an Impinj R700 or Brady FR22 reader to work
- 12 dBic gain for up to 20m read range
- Circular polarization for reliable tag detection
- IP67-rated for outdoor and harsh environments
- Wide frequency range: 865-928 MHz (ETSI & FCC)
- Ideal for portal applications and dock doors
High-performance antenna for demanding setups
The Kathrein WRA 3070 is the antenna in your RFID setup. It communicates with RFID tags by transmitting and receiving radio signals. It must always be connected to an RFID reader (Impinj R700 or Brady FR22) which does the actual processing. With 12 dBic gain, circular polarization and a focused 30°/65° beam pattern it ensures reliable tag reads up to 20 meters. Ideal for RFID portals, dock doors and vehicle tracking.
- 12 dBic gain — High gain for up to 20m read range
- Circular polarization — Reads tags in any orientation for consistent results
- 865-928 MHz — Wide frequency range for global RFID compatibility
Industrial-grade durability, rain or shine
With IP67 protection, the Kathrein WRA 3070 is built to withstand dust, water immersion and extreme temperatures. Mount it outdoors at loading docks, in manufacturing halls or anywhere your RFID infrastructure needs to perform reliably day after day.
- IP67 protection — Fully dust-tight and protected against water immersion
- TNC connector — Low-loss connector for professional installations
- Compact & robust — Durable housing designed for permanent installation
Technical specifications
RF Performance
- Frequency range
- 865-868 MHz (ETSI) / 902-928 MHz (FCC)
- Gain
- 12 dBic
- Polarization
- Circular
- Beamwidth
- 30° horizontal / 65° vertical
- Read range
- Up to 20m (tag-dependent)
Physical Specifications
- Dimensions
- 610 x 320 x 77 mm
- Connector
- TNC female
- Protection
- IP67 rated
- Mounting
- Pole / gantry mount (integrated bracket, 100x100mm VESA)
Environmental
- Operating temp.
- -40°C to +70°C
- Humidity
- Up to 95% non-condensing
- UV resistance
- Yes. Designed for permanent outdoor use
Compatibility
- Reader required
- Yes, Impinj R700 or Brady FR22 (sold separately)
- Reader compatibility
- All UHF RFID readers with SMA port
- Beam compatible
- Yes, paired with Impinj R700 or Brady FR22
- Cable length
- Custom (SMA cable not included)
- Warranty
- 2 years
Frequently asked questions
Does this antenna work on its own?
No. The Kathrein WRA 3070 is an antenna only. It cannot read RFID tags by itself. You always need a separate RFID reader connected to it. In the Beam ecosystem this is either the Impinj R700 (supports up to 4 antennas) or the Brady FR22. The reader is sold separately and is not included with this antenna.
Is the antenna suitable for outdoor use?
Yes. The WRA 3070 is IP67-rated, meaning it is fully dust-tight and protected against temporary water immersion. The UV-resistant housing ensures long-term outdoor durability.
What is the difference between this and the A1000 antenna?
The Kathrein WRA 3070 offers higher gain (12 dBic vs 6 dBic), better IP protection (IP67 vs IP65) and is designed for larger, more demanding setups like RFID gates and dock doors with up to 20m read range. The A1000 is a more budget-friendly option for smaller or dense antenna deployments.
How many antennas do I need for an RFID gate?
A typical RFID gate uses 2-4 antennas depending on the width and required read accuracy. For a standard doorway, two antennas (one on each side) often suffice. Contact us for advice on your specific setup.
Does a cable come included with the antenna?
No, the SMA cable is not included as cable length depends on your installation. We can advise on the right cable type and length for your setup to minimize signal loss.
Compatibility is only the beginning.
A reader’s ability to connect does not prove that every tag can be read reliably in every environment. That is why hardware, tags, products, read zones, volumes and exceptions are tested together before any performance commitment becomes part of the scope.
Product specifications describe the device. The right model, connectivity, availability and price are confirmed in your quote.
Discuss your requirements →
