A1000 RFID Antenna
Standard fixed RFID antenna
From €159
Fixed RFID readers
Brady FR22 Lite 4-Port RFID Reader
The Lite variant of the Brady FR22 RFID reader. Same powerful Impinj E710 RFID engine as the full FR22, without WiFi, HDMI video output, GPIO and support for expansion modules like the MUX16 multiplexer. Ideal for straightforward RFID setups where you need reliable fixed reading without the extra connectivity options.
Why choose the Brady FR22 Lite
- Same Impinj E710 RFID engine as the full FR22
- 4 antenna ports for flexible zone coverage
- PoE powered. Single cable for data and power
- Lower cost than the full FR22 (no WiFi, HDMI, GPIO)
- Not expandable with MUX16 or BFA modules
- Seamless IoT Bridge integration
Solid RFID performance where it counts
The FR22 Lite delivers dependable tag reading for medium-volume environments. With 4 antenna ports you can cover key zones like doorways, shelves and workstations. Powered over Ethernet for clean, simple installation.
- 4 antenna ports — Connect up to 4 antennas for multi-zone coverage
- PoE powered — Single Ethernet cable for power and data
- LLRP protocol — Industry-standard protocol for universal compatibility
Connect, configure, and go
Pair the FR22 Lite with the Beam IoT Bridge and your antennas. Configure everything through the Beam app. No complex middleware required. Monitor read performance in real time and adjust antenna settings from your dashboard.
- IoT Bridge compatible — Connects seamlessly through the Beam IoT Bridge
- Beam app configuration — Full reader management from the Beam platform
- Real-time monitoring — Track read performance and antenna health live
Technical specifications
RFID Performance
- Antenna ports
- 4 RP-SMA
- RFID chip
- Impinj E710
- Tag throughput
- Up to 1,000 tags/second
- TX power
- +32 dBm (ETSI)
- Sensitivity
- -87 dBm
- Protocol
- EPC Gen2v2 / ISO 18000-63
- Frequency
- 865-868 MHz (EU) / 902-928 MHz (US)
Power & Connectivity
- Power
- PoE 802.3at (PoE+)
- Ethernet
- 10/100 Mbps RJ-45
- USB
- 2x USB 2.0 Type-A + 1x USB-C
- Wireless
- Bluetooth 5 LE (no WiFi)
- GPIO
- Not available (see full FR22)
- Video
- Not available (see full FR22)
- Expansion modules
- Not supported (MUX16, BFA not compatible)
- Management
- Via Beam IoT Bridge
Processing
- Processor
- Quad-core ARM Cortex-A7, 1.1 GHz
- Memory
- 1 GB RAM, 8 GB Flash
- OS
- Linux (edge computing capable)
Physical
- Dimensions
- 203 x 78 x 18 mm
- Weight
- 306 g
- IP rating
- IP20
- Operating temp
- -20°C to +55°C
- Warranty
- 2 years
Frequently asked questions
How many antennas can I connect to the FR22 Lite?
The FR22 Lite supports up to 4 antennas. Each port can drive one antenna, allowing you to cover multiple zones such as doorways, shelves or workstations from a single reader.
Do I need an IoT Bridge to use this reader?
Yes. The IoT Bridge acts as the central connection point between your RFID readers and the Beam platform. It manages device communication, configuration and data flow to the cloud.
What is the difference between the FR22 Lite and the full FR22?
Both share the same Impinj E710 RFID engine and processing platform. The full FR22 adds WiFi (dual-band), full Bluetooth stack, HDMI video output, GPIO ports, and support for expansion modules like the MUX16 (16-port multiplexer) and BFA antenna. The Lite is ideal when you only need wired Ethernet connectivity and 4 fixed antenna ports.
Can I power the reader with a regular Ethernet cable?
The FR22 Lite uses Power over Ethernet (PoE), so you need a PoE-capable switch or injector. This provides both data and power through a single cable, simplifying installation.
What kind of tags does the FR22 Lite read?
The FR22 Lite reads UHF RFID tags in the 865-928 MHz range using the LLRP protocol. It is compatible with all standard passive UHF RFID tags and labels.
Compatibility is only the beginning.
A reader’s ability to connect does not prove that every tag can be read reliably in every environment. That is why hardware, tags, products, read zones, volumes and exceptions are tested together before any performance commitment becomes part of the scope.
Product specifications describe the device. The right model, connectivity, availability and price are confirmed in your quote.
Discuss your requirements →
